Tamiya 1/24 Yamaha YZR-M1 Front Fork Set (12613) The Tamiya 1/24 Yamaha YZR-M1 Front Fork Set is a plastic model kit in the Tamiya 1/12 Motorcycle Plastic Model Kits range. Tamiya presents this Front Fork Set for use with Item 14104 1/12 Yamaha YZR-M1 50th Anniversary U.S. Inter-coloring Edition. Set includes highly detailed parts to help you achieve that expert-level finish. Set includes: Front fork and movable steering damper parts (plastic). Gold anodized aluminum inner shaft. Pre-painted spring (yellow). Fork inner~ outer and top parts (machined aluminum). Compatible Kits: Item 14104 1/12 Yamaha YZR-M1 50th Anniversary U.S. Inter-coloring Edition. Manufacturer: Tamiya Model: 12613 Yamaha YZR-M1 Front Fork Set

Tamiya 1:20th scale Lotus Type 79 Martini 1979 Model F1 Kit (20061) Abourt this modelThe front and rear upper cowls can be removed after assembly to view the engine and cockpit area as well as additional H and J Parts have been included to accurately depict the differences from the Lotus Type 79 1978 (product 20060)Paint and Glue not included

Tamiya Suzuki GSX1100S Katana (14010) The Tamiya Suzuki GSX1100S Katana in 1/12 scale from the plastic motorcycle model range accurately recreates the real life Japanese sport motorcycle. This plastic motorcycle kit requires paint and glue to complete. Manufacturer: TamiyaModel: 14010 Suzuki GSX1100S KatanaScale: 1/12

Tamiya 1:48th Scale Road Sign Set Plastic Kit. Product Code 32509. Paint and Glue not included

Tamiya Yamaha YZF-R1 Model Kit (14073) The Tamiya 1/12 Yamaha YZF-R1 is a plastic model kit in the Tamiya 1/12 Motorcycle Plastic Model Kits range. At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike. Manufacturer: Tamiya Model: 14073 Yamaha YZF-R1

Tamiya 1:10th Scale XB R/C rising storm 4WD (57731) Its Fast and its Furious !!!!The Tamiya XB Rising Storm 4WD Buggy in 1/10 scale is the latest addition to the range of Tamiya Expert Built off road electric radio control cars.About the ModelOverall length: 395mm1/10 scale fully assembled R/C buggy with body pre-painted and all markings pre-applied.Shaft-driven 4WD DF-02 chassis featuring longitudinally mounted motor and battery layout.Low center of gravity and wide tread provides extra stability and superb handling.Semi-bearing differential gears for reduced friction packed into a sealed front and rear gearbox for minimal wear and damage on rough terrain.Metal dogbone drive shaft.Type-540 motor and electronic speed controller pre-installed.Includes high performance Expec R/C system (batteries and charger sold separately).ELECTRIC XB KITS INCLUDE:Radio: 2-Channel with servo(s)Battery: 6-cell flat with standard Tamiya connector

Tamiya 1:24th scale Mitsubishi Pajero Exceed Model Car Kit (24115) About this modelLadder frame chassis is accurately reproduced.Front and rear suspension incorporate coil springs to enable suspension movement.Hood is molded with clear plastic to allow viewing of the V6 3-liter engine. Hood is detachable even after assembly.Semi-gloss finish metal-plated wheels, side steps, and cam covers and gloss finish metal-plated front grille and side mirrors are included.Parts to depict the model as either a left-hand drive or right-hand drive vehicle are included.Large diameter tires feature realistic tread pattern. Paint and Glue not included

Tamiya XB This fantastic model is ready built and comes with all radio gear, a battery and charger. Simply put on charge and you are ready to go!!!! (No construction required) The Tamiya XB Rising Fighter inherits all its great qualities and excellent performance from its predecessors The Hornet (Item 58336) and The Grasshopper (Item 58346) and also uses a similar body of that to other fighter series R/C cars. About this modelLength: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.Bevel type diff gear.Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).Fully enclosed gearbox preventing dirt and debris from interfering from operation.Powered by a 540 motor.(included)Grooved front tires and rear spike tires ensure excellent traction for any surface.Stylish resin molded body.-ESC and Expec 2-channel R/C system included.ELECTRIC XB KITS INCLUDE:Radio: 2-Channel with servo(s).Battery: 6-cell flat with standard Tamiya connector.Charger: Tamiya 6 Cell Mains Slow Charger.Paint: Includes fully painted body shell.Manufacturer: TamiyaModel: XB Rising Fighter (57781)